No RGS news today, except that I've been completely swamped by end-of-school year and work busyness - so updates to the RGS site are lagging. And the basement suffered more water - but it was less than an inch and did no damage, to the layout or the rest of the basement. It's been raining a LOT here in the Midwest!
I did, however, just return from a very fun weekend chaperoning our high school's music dept trip to Cedar Point amusement park, in Sandusky OH. I - and the kids - went mostly to ride the many awesome roller coasters in the park, but there is a narrow-gauge connection there.
If you weren't aware, the park has a wonderful narrow gauge steam railroad, with no less than FIVE steamers running on it. All are very small industrial loocos, mostly rebuilt from 0-4-0Ts, but it's still nice to smell the coal smoke and hear steam whistles while waiting in lines.
May 24, 2011
RGS Goose 4 rebuild progress
If you haven't been aware, Telluride's Galloping Goose - the last of the remaining original 6 that's not yet been restored - is being restored. There details and photos about the rebuild effort on the Ridgway Museum's site.
There's some photos and discussion of the engine in this goose on the NG Disc List lately, which is a GMC 361 from WWII vintage (surplus, and delivered new to the RGS). Some thought these were built for WWII half-tracks, but that's not true.
There's some photos and discussion of the engine in this goose on the NG Disc List lately, which is a GMC 361 from WWII vintage (surplus, and delivered new to the RGS). Some thought these were built for WWII half-tracks, but that's not true.
May 23, 2011
DigiTrax install coming along
I've been slowly finding time to continue w/ the DigiTrax DCC installation on the layout. I know have all the UP5 panels wired - each with a feed to a 12v power supply, and the track indicator LED wired into the track for that town.
Each town is supplied by a DCC Specialities PSX or (for Telluride) a PSX-AR unit. There's just a little bit of work left to finish the PSX wiring, break the Keller system, and tie the PSX's into the wiring for each town. Soon... in the meantime I'm still running a train w/ the Keller system, just to the track sorta clean.
And, both command station and aux booster are wired into transformers left over from the Keller OnBoard system. The transformers are putting out 20v AC, which is at the top of the range for the DigiTrax boosters, but hopefully they'll work ok. They're in spec per the manuals.
And - I've FINALLY programmed my first loco. I installed a DH123 in a Bachmann 2-8-0, and connected the PR3 to my Mac, and programmed it w/ JMRI's Decoder Pro. A little bit of a learning curve on both the software (free) and the decoder settings, but it seemed to go well.
But, because the Keller system isn't completely disconnected yet, I haven't actually powered up the DCC system yet, and also haven't tested yonder newly-programmed steamer. I think I can run a throttle w/ JRMI and test it on the workbench that way - haven't tried that yet.
It's a fun time - learning lots of new stuff.
Each town is supplied by a DCC Specialities PSX or (for Telluride) a PSX-AR unit. There's just a little bit of work left to finish the PSX wiring, break the Keller system, and tie the PSX's into the wiring for each town. Soon... in the meantime I'm still running a train w/ the Keller system, just to the track sorta clean.
And, both command station and aux booster are wired into transformers left over from the Keller OnBoard system. The transformers are putting out 20v AC, which is at the top of the range for the DigiTrax boosters, but hopefully they'll work ok. They're in spec per the manuals.
And - I've FINALLY programmed my first loco. I installed a DH123 in a Bachmann 2-8-0, and connected the PR3 to my Mac, and programmed it w/ JMRI's Decoder Pro. A little bit of a learning curve on both the software (free) and the decoder settings, but it seemed to go well.
But, because the Keller system isn't completely disconnected yet, I haven't actually powered up the DCC system yet, and also haven't tested yonder newly-programmed steamer. I think I can run a throttle w/ JRMI and test it on the workbench that way - haven't tried that yet.
It's a fun time - learning lots of new stuff.
Apr 26, 2011
Ridgway dry at last; 4-wire Loconet?
Well, the last repair to the water supply line about Ridgway seemed to have worked, when I replaced the entire hose on the dishwasher input line. This had been leaking at the connection in the basement, and no amount of tightening, thread sealant, or washers was working. So - the new hose worked fine.
Except - the attachment at the other end (behind the dishwasher, upstairs) then stared leaking a day after I finished the work. So that came off, more sealant, much tighter fastening, and it seems ok now. I even replaced the drop ceiling tile that's about the yard.
So, on to other things, perhaps? I haven't had a chance to return to updating Denver library photo links on the website (soon, probably), but I did start wiring the LocoNet for the new Digitrax system. After a bit of research, I think I can use some of the thru-the-ceiling runs of my old control network for the LocoNet. The old cabling is a 4-wire 2-twisted-pair cable, w/ the pairs individually shielded and then the overall cable wrapped in another mesh shield. And LocoNet can be dropped to only 4-wires I guess (combining pins 2-5 and 3-4), so I'm going to try that for most of the control runs.
The run between the two boosters I'll keep to a normal 6-wire flat cable, just to be sure.
Another thought, is whether to tie the grounds on the booster together w/ the ground terminal, and drop pins 2-5 in the LocoNet cable. I'm not sure if I need to do that - anybody know?
Except - the attachment at the other end (behind the dishwasher, upstairs) then stared leaking a day after I finished the work. So that came off, more sealant, much tighter fastening, and it seems ok now. I even replaced the drop ceiling tile that's about the yard.
So, on to other things, perhaps? I haven't had a chance to return to updating Denver library photo links on the website (soon, probably), but I did start wiring the LocoNet for the new Digitrax system. After a bit of research, I think I can use some of the thru-the-ceiling runs of my old control network for the LocoNet. The old cabling is a 4-wire 2-twisted-pair cable, w/ the pairs individually shielded and then the overall cable wrapped in another mesh shield. And LocoNet can be dropped to only 4-wires I guess (combining pins 2-5 and 3-4), so I'm going to try that for most of the control runs.
The run between the two boosters I'll keep to a normal 6-wire flat cable, just to be sure.
Another thought, is whether to tie the grounds on the booster together w/ the ground terminal, and drop pins 2-5 in the LocoNet cable. I'm not sure if I need to do that - anybody know?
Apr 16, 2011
Take four on the plumbing
Well, hopefully 4th time's the charm... I ended up replacing the entire dishwasher hose of Ridgway this afternoon. It's time for the season to return!
I got a little more work done on the Digitrax DCC install. The track wiring won't be a big change, as I designed that for DCC from the start. But, the control network is different, and requires it's own power supply to run out to each of the UP5 panels, in addition to the control signal. Sigh. I'm sure I will love DCC, but after so many months of working on wiring (mostly detection and hidden-track signalling of late, and Tortisi), I'm kinda tired of it.
I got a little more work done on the Digitrax DCC install. The track wiring won't be a big change, as I designed that for DCC from the start. But, the control network is different, and requires it's own power supply to run out to each of the UP5 panels, in addition to the control signal. Sigh. I'm sure I will love DCC, but after so many months of working on wiring (mostly detection and hidden-track signalling of late, and Tortisi), I'm kinda tired of it.
Subscribe to:
Posts (Atom)